1972 Custom 35' (10.67 m) Samson Ferro-Cement Ketch
New Bern, North Carolina, United States
Refit Year: 2005 SANDPIPER
This is NOT a project boat. This is a 100% ready to go, fully operational, proper cruising yacht with nearly $40K of upgrades in the last two years alone. This vessel is coast guard documented and proven in offshore cruising to the Cuba & Mexico. Beautiful accommodations with all the comforts.
- Ketch / Cruisers
- Sail
- Used
- Diesel
- Ferro-Cement Hull
Description
Welcome aboard 35-foot, 12-ton displacement custom Bluewater cruising ketch, The Sandpiper. This boat is 100% ready to go. Brand new centerboard winch/cable + casing, engine repowered in 2005, sails still like new, brand new bimini, dodger, sail cover cushions (2023), complete AC/DC electrical rewire $20k value 2024. Impressive cruising resume including Cuba and Mexico. Spacious, and gorgeous live aboard accommodations, and the driest bilge on the east coast. MAKE AN OFFER. All offer's considered. The Sandpiper must leave the nest!
This is NOT a project boat. This is a 100% ready to go, fully operational, proper cruising yacht with nearly $40K of upgrades in the last two years alone. This vessel is coast guard documented and proven in offshore cruising to the Cuba & Mexico. Beautiful accommodations with all the comforts including refrigeration, wind-gen, brand new cushions, lines led aft, and more.
Highlights/Overview:
2024 Complete AC/DC Electrical/Power Distribution Rewire to ABYC Standard (all new panels, wires, breakers, fuses, battery power cables, new Victron Inverter and charging system, over charging and reverse current protection on alternator, new Diesel power cable, New grounding plate + grounding system, new panel finish plate. New electrical system ready to accept LiFePo batteries without any additional modifications).
2023 New Dodger, Bimini, sail covers, cushions, lee cloths
2005 Repowered Yanmar 35 HP Diesel Engine, only 1650 hours 2024
2023 New Center Board Winch Cable
2023 Bottom Paint, diver cleaned every other month
Completely outfit for offshore safety & comfort
Gorgeous, hardwood interior; bone dry bilge;
Sails in excellent condition w/ crinkles; refrigeration, radar, wind generator
Offshore proven to Cuba & Mexico
Over $25K in upgrades 2023-24
This Coast Guard Documented Vessel is an impressive sailing yacht commissioned to be built in 1972 by NASA Rocket Scientists/Engineers in the Annapolis area, the yachting center of the mid-coast Atlantic. Laid up by professional boat builders in Middle River, Maryland, during the height of the boat-building boom on the Chesapeake Ba. Enjoyed occasionally as a family cruising boat then sold to loving and capable Welsh couple for international sailing. Meticulously maintained; completely restored, re-powered, rebuilt, and outfitted to modern cruising specs and standards from 2005-2024.
This well cared for custom sailing yacht's circuit board boasts a few parts from NASA rocket ships. Sandpiper's hull design is a Samson adaptation of the famous Sparkman & Stephens ocean racer 'Finisterre', incorporating Annapolis racer-cruiser innovation and traditional Skipjack lines of Chesapeake working sailing vessels.
Ready-to-go as is for expedition, adventure cruising lifestyle and full-time live-aboard. The Sandpiper is truly a one of a kind vessel. Not an ounce of neglect from stem to stern. Dreamy bronze, round portholes. Bone dry and spotless bilge. Heavy displacement at 12T (22,000lbs) and 5,500lbs of lead ballast makes for a stable sea kindliness and cavernous cabin accommodations.
Brand new canvas throughout the entire boat. Secure cockpit design. Safe and seaworthy ketch-rigged with like-new sails. Ship-like interior. Nine-foot centerboard and four-foot shoal draft make this long-distance sailing ketch the perfect boat for crossing the Gulf Stream to the Bahamas next season.
The Sandpiper is presently docked in the hurricane hole of New Bern, North Carolina, safely tucked up the Neuse River and must sell due to obligations and responsibilities of owner's which will prevent them from spending further, adequate time in U.S. waters, where the boat is flagged/registered/stored while they reside in the U.K. It's been an excellent run. The Sandpiper just had a bottom job in April 2023, is literally turn-key and ready to pass the torch.
From gunk-holing in the vessel's home waters; to the Canadian maritime islands and Nova Scotia. Proven seaworthiness crossing the Gulf Stream to western Caribbean ports. The harbor's of Cuba and cruising Mexico's Cozumel, Isla Mujeres, Tulum and Cancun beaches, and enjoying the east coast cruising of the United States. Well-cared for by owners for 20+ years, one of whom grew up at sea and is a professional illustrator and the other formerly in film production and currently working on refugee resettlement camps around the world.
The Sandpiper is fit to be a world cruiser in every sense of the term.
With stringers and compression post reinforcement throughout the bright and airy cabin, easy bilge and locker access, the structural integrity is notable. Marine plywood bulkheads covered in thick fiberglass are bolted to the boat's frame and integral to the hull. All are rock solid and pristine. The hull and decks are ferro-cement and have shown no signs of degradation or wear and tear in 50 years.
Ferro-cement is known for its "reef-busting" qualities and as a high pedigree material among one-off boat builders. Many vessels constructed from ferro-cement have gone on to complete long-distance voyages on treacherous waters and are still cruising their home waters today. This construction method has been proven at sea. The Sandpiper was adapted and built for the Chesapeake Bay and the Bahamas specifically.
The strength and integrity of the Sandpiper has been thoroughly upheld for 50-years. Inspected at least every three years on the hard since 2005.
A full-service marine survey valued the vessel at $40,000 in 1972 and once again in 2015. The asking price is $40,000 as is where is. The vessel is currently insured for $40,000. Extensive maintenance and upgrade logs, tools, spares parts, all available. Survey from 2015 and 1972 available upon request.
Perfect for cruising couple or family. Seaworthy and conformable. Amenities and convenience balance with tradition to create a floating home feeling down below. Spacious ship conditions down below, seaworthiness above decks, well-canvased safe rig. Offshore proven.
Highlights Continued
-Sails like new, heavy cruising Dacron, only used a few months per year and not even every year, no mold ever. Maintained + low hours/use, still crisp.
- Brand new cushions settees / side berths, sea bunks with built in lee cloths, built in back rests, 5" foam, full-cockpit Bimini, dodger with stainless steel frame, isinglass windows, mast and, radar, autohlem
-Massive storage, long lasting cold refrigeration, solar , wind gen, inverter, shore power, classic oil lamps, LED, lots of bronze, 12v-fans for ventilation (no mold, ever), bronze port lights, dorades.
-Force 10 safety-rated propane stove
-RE-POWERED in 2010 with Yanmar 35-HP, 3HM35F; all clean, new gear box, new coupling, new drive train. PYI dripless shaft seal 2022
-Rebuilt center board trunk 2007 for good measure/maintenance, heavily glassed; inspected
-Overhauled the centerboard trunk 2023, no significant degradation since rebuilt 15 years ago6 (Centerboard casing, cast into the ballast, made from black iron/carbon steel, and sheathed in polyester fiberglass, capped with 3/8? glass and 1/8? 316 stainless plate)
-Centerboard winch + system replaced 2022
-PYI dripless prop-shaft seal 2022
-bottom painted May 2023
-2 kw battery charger for starter battery runs off solar/wind gen inverter, 5hp mercury dinghy motor, off grid + shore power, Dinghy, folding bikes, self steering wind vane and roller-furler aboard for installation.
The structural integrity of the The Sandpiper inspired The Sandpiper Toast preferably with a spot of rum in clear Caribbean waters!
The sandpiper toast
An arm around every post
All crew must sip at once
-running rigging
-lifelines
-liferaft
Due to be replaced...
Full equipment list & spec below: contact listing broker, details below
Completely restored, rebuilt, and ready to go. Cruised and meticulously maintained, updated & upgraded from 2005-2024.
Measurements
Length Overall: 38'0"
Length on Deck: 35'0"
Beam: 11'3"
Draft: 3'11" (9'0" with centreboard down)
Displacement: Net 12 T
Ferrocement Hull & Decks
Wide side decks give good access to the bow
Armature 0.225" spring steel rods run longitudinally on 2" centers
0.25" high carbon steel rods run girth-wise on 3" centers
1/4" square mesh, 2 layers inboard, 1 layer outboard
Web Frames rod and mesh tack welded to armature
Engine Bed - ¼" steel plate self-contained custom bed, integral stringers lag-bolted to oak posts welded and glassed to armature.
Portland Cement with pozzolan.
General
Cabin and Cockpit 3/4" marine plywood covered with fiberglass cloth
Keel-mounted skeg rudder, with lower cutless-style shoe (¼" 316). 316 stainless steel rudder jaws to 2.5" rudder-post, with nylon upper bearing, stern-post sleeved in fibreglass inside galvanized tube
Drop-Keel Centreboard 5'0" - fibreglass on ply with lead and stainless steel structure
Bow pulpit in 316
Mast 43'0" aluminum, deck-stepped, Metalmast Marine
Chainplates 316 SS 1/4" bar stock
Standing Rigging 9/32" SS wire rope with 1/2" SS turnbuckles
2" teak platform and 2 bow rollers integrated (rebuilt 2019)
On Deck
Plath/Simpson Lawrence bronze windlass.
Spare mast-mounted Lewmar halyard winches
Barlow self-tailing sheet winches in cockpit.
Sandpiper's stern
Sails & Engines
6 sails - working jib, storm jib, 120 Genoa, drifter, main (2 reefs), mizzen (2 reefs), mizzen staysail
Yanmar 3HM35F
Protected Shaft and Propeller: PYI dripless seal on 1¼" 322 stainless shaft, refitted with new donut in 2022.
Mercury 5hp outboard and West Marine Dinghy
(Unfitted) Profurl roller headsail furling
The head is on the portside, aft
Tanks & Sanitation
Diesel - Two fuel tanks holding 40 gallons fuel in total. Three jerry cans with 15 extra gallons.
Propane: Two Aluminium 20lb tanks, with cutoff sensor.
Three water bladders with capacity for 420 litres of water. (extra water storage in jerry cans)
Holding tank 10 gallons, plastic
Jabsco manual head
Communications & Navigation
Self-steering Navico/Raymarine WP5000 Wheel Pilot
(Unfitted) Hasler windvane
Depth/Speed - Raymarine st60 Seatalk with repeater
GPS Garmin 210 plotter
SSB radio ICOM 600 with AT150 Tuner
Radar: Autohelm/Raymarine ST50
ACR Beacon
Standard Horizon GX2150 VHF with AIS
Standard Horizon HX890 Handheld VHF/GPS
Galley
Force 10 stove in galley two burner with grill and oven.
Force 10 stainless propane grill/barbecue on deck/pushpit.
Large capacity well-insulated ice chest (with 5 amp 12v Cold Machine Refrigeration)
Ground tackle
Heavy-duty ground tackle (45lb CQR, 35lb Danforth and a Mud/Maxx Anchor,) 200ft ? chain, 200ft of rode, Parachute Drogue/Sea Anchor, and 600ft of storm rode.
ElectricalTwo 75watt solar panels on stern
300w AirBreeze Wind generator
150w Solar panels
80amp alternator
110v 30A shore power system with breakers/outlets
600 house battery Amp hours
100 a/h starting battery
2 Kw Inverter
Solar charge controller
Guest ChargePro 5/5 battery charger
Propane isolator system
Emily Greenberg Listing Broker 631 599 8521 Emily@suncruising.com
links :
https://www.sailboat-cruising.com/Ferrocement-Finisterre-Ketch.html
Specifications
In Stock: Yes
LOA: 38' (11.58 Meters)
Type: Sail- Used
Year: 1972
Refit Year: 2005
Beam: 11' 3''
Draft Max: 9'
Draft Min: 3' 11''
Fuel Type: Diesel
Hull Material: Ferro-Cement
Hull Shape: Displacement
Photos click to view all
Multimedia
Engines
Engine 1
- Engine Make: Yanmar
- Engine Model: 3HM35F
- Engine Year: 2005
- Power HP: 35.00
- Power KW: 26.10
- Fuel Type: Diesel
- Hours: 1650.00
Engine 2
- Engine Make: Yanmar
- Engine Model: 3HM35F
- Engine Year: 2005
- Engine Type: Inboard
- Power HP: 34.00
- Power KW: 25.35
- Fuel Type: Diesel
- Hours: 1650.00
Full Details
Listing MLS by Yachtr.com
Contact Us
Want more information?
Emily Greenberg
Yacht Broker
134 Riberia Street
Suite 10
Saint Augustine FL 32084 USA
Office: 631-599-8521